CE&FDA Approved New 3D Dental Clinic Model Scanner Intraoral Oral Trade Handheld Digital Dental 3D Intraoral Scanner With Software,Digital Implant / Orthodontics / Restoration

User Manual

Introduction

Specification

The mirror angle of the scanning tip is close to 45 degrees, which can take into account the mesial and distal areas at the same time.

Size：

Product Superiority

1.Quick Scan
Linear scanning speed up to 80mm/s, faster reconstruction, more optimized matching algorithm.

2.Screw-in cable tail
Aluminum alloy screw-in cable tail, to ensure a stable connection, retain the pluggable design of the wire, and the wire can be replaced.

3.Universal Type-c data cable
The connection cable adopts double-headed universal Type-c data cable, which is convenient for after-sales replacement.

4.Powerful circuit cooling system
Unique heat dissipation circuit system design, the integrated handpiece has no heat dissipation holes, the operation is noiseless, the patient experience is good, no dust enters, and the service life is longer.

5.Stylish and lightweight
The overall appearance of the handpiece is streamlined, and the net weight of the body is about 225g, which is more convenient for dentists to operate.

6.The scanning tip can be sterilized by high temperature and high pressure for 100 times;Dual scanning tip configuration is optional, with 3 normal scanning tips and 1 smaller scanning tip as standard, all of which can be sterilized by high temperature and high pressure for 100 times.

7. Heating design inside the scanning tip
The heating speed is fast and the temperature is stable, preventing the scanning tip lens from fogging.

8. Protective tip and calibration tip
Complete protective tip as standard, no need for regular calibration.

9. AI intelligent scanning
Using deep learning algorithms to remove soft tissue in real time; the scan is smoother and the scan result is cleaner; AI functions have a wide range of expansion space: edentulous jaw optimization, caries detection, automatic labeling, etc...

10. Handpiece intelligent remote control
Long press the handpiece button to enter the selection page, then short press to switch, long press to confirm. Six modes are available: upper arch, lower arch, left occlusion, right occlusion, metal, AI

11.Metal scanning
Key optimizations have been made for the following problems: strong metal reflections and many noise points; small effective reconstruction area and difficult splicing.

3 Steps To Empower Clinical Implant Cases

Oral Health Report

Generate report automatically：
The Al algorithm of deep learning can accurately find and locate the lesion, and generate the patient's oral health report automatically.

Real-time review：
Reports support real-time and remote review, which facilitates communication between dentists and patients, making the whole diagnosis and treatment more intuitive and vivid.

Support printing report：
Patients can save the printed report to provide a basis for subsequent diagnosis and treatment.

Scanning Lock

Cloud Share

It will generate QR codes and links to tranfer the data in Runyes 3DS Plus software. Cloud sharing makes communication easier for clinics to collaborate with dental labs and Cloud sharing service ensures data security and reliability.

Unique Functions

1.Metal Scan
Key optimizations have been made for the difficulty of noises and reflecting during metal scanning. Optimized metal scan tools can help dentists scan all kinds of metal materials easier.

2.Margin Line Drawing
The Margin Line tool can help dentists to draw a margin line on the scan data and exportitto a proprietary format. The marked margin line data can be imported to design software suchas EXOCAD.

3.Model Builder
The Add Base tool can help dentists generate model fles that can be directly used for printing with one click.

4.Undercut Inspection
It will help dentists to check whether there is undercut in the prepared tooth area, so as to prevent the crown from being unable to be processed, or there is an excessive gap between the crown and the prepared tooth.

5.HD Camera
Dentists can use the camera to take oral pictures during scanning; high-resolution photos can be used as case attachments and saved in the reports.

6.Occlusion Distance
Dentists will check whether the occlusion relationship between the upper and lower jaws is accurate or not with this function.

Technical Parameters

Basic Computer Configuration:
Required(Recommended):Microsoft Windows 10 64bit Pro edition or above;
Processor: Intel Core i7-9700H, 16GB or above;
Graphics Card: NVIDIA GeForce 1660, 6GB or above;
Note: AMD Graphics may not support all software functions, which is not suggested. SSD: 256GB or 128GB + 1TB mechanical disk or above;
Port: USB 2.0/3.0
Display Resolution: 1920x1080
Device Operation

Environment:
a) Temperature: 10°C-40°C
b) Relative Temperature: <85%
c) Atmospheric Pressure: 86KPa-106Kpa

Power Supply:
a) Voltage: 100~240V, 50/60Hz
b) Power: 25 VA

Device Storage Environment:
a) Temperature:-20°C-55°C
b) Relative Temperature:10%-93%
c) Atmospheric Pressure: 86KPa-106KPa